[TL;DR: Apache Lucene 6.0 quietly introduced a powerful new feature called near-real-time (NRT) segment replication, for efficiently and reliably replicating indices from one server to another, and taking advantage of ever faster and cheaper local area networking technologies. Neither of the popular search servers (Elasticsearch, Solr) are using it yet, but it should bring a big increase in indexing and searching performance and robustness to them.]
Lucene has a unique write-once segmented architecture: recently indexed documents are written to a new self-contained segment, in append-only, write-once fashion: once written, those segment files will never again change. This happens either when too much RAM is being used to hold recently indexed documents, or when you ask Lucene to refresh your searcher so you can search all recently indexed documents.
Over time, smaller segments are merged away into bigger segments, and the index has a logarithmic “staircase” structure of active segment files at any time. This is an unusual design, when compared with databases which continuously update their files in-place, and it bubbles up to all sorts of nice high-level features in Lucene. For example:
- Efficient ACID transactions.
- Point-in-time view of the index for searching that will never change, even under concurrent indexing, enabling stable user interactions like pagination and drill-down.
- Multiple point-in-time snapshots (commit points) can be indefinitely preserved in the index, even under concurrent indexing, useful for taking hot backups of your Lucene index.
The ZFS filesystem‘s has similar features, such as efficient whole-filesystem snapshots, which are possible because it also uses a write-once design, at the file-block level: when you change a file in your favorite text editor and save it, ZFS allocates new blocks and writes your new version to those blocks, leaving the original blocks unchanged.
This write-once design also empowers Lucene to use optimized data-structures and apply powerful compression techniques when writing index files, because Lucene knows the values will not later change for this segment. For example, you never have to tell Lucene that your doc values field needs only 1 byte of storage, nor that the values are sparse, etc.: Lucene figures that out by itself by looking at all values it is about to write to each new segment.
Finally, and the topic of this post: this design enables Lucene to efficiently replicate a search index from one server (“primary”) to another (“replica”): in order to sync recent index changes from primary to replica you only need to look at the file names in the index directory, and not their contents. Any new files must be copied, and any files previously copied do not need to be copied again because they are never changed!
Taking advantage of this, we long ago added a replicator module to Lucene that used exactly this approach, and it works well. However, to use those APIs to replicate recent index changes, each time you would like to sync, you must first commit your changes on the primary index. This is unfortunately a costly operation, invokingfsync on multiple recently written files, and greatly increases the sync latency when compared to a local index opening a new NRT searcher.
Document or segment replication?
The requirement to commit in order to replicate Lucene’s recent index changes was such a nasty limitation that when the popular distributed search servers Elasticsearch and Solr added distributed indexing support, they chose not to use Lucene’s replication module at all, and instead created their own document replication, where the primary and all replicas redundantly index and merge all incoming documents.
While this might seem like a natural approach to keeping replicas in sync, there are downsides:
- More costly CPU/IO resource usage across the cluster: all nodes must do the same redundant indexing and merging work, instead of just one primary node. This is especially painful when large merges are running and interfere with concurrent searching, and is more costly on clusters that need many replicas to support high query rates. This alone would give Elasticsearch and Solr a big increase in cluster wide indexing and searching throughput.
- Risk of inconsistency: ensuring that precisely the same set of documents is indexed in primary and all replicas is tricky and contributed to the problems Elasticsearch has had in the past losing documents when the network is mis-behaving. For example, if one of the replicas throws an exception while indexing a document, or if a network hiccup happens, that replica is now missing a document that the other replicas and primary contain.
- Costly node recovery after down time: when a replica goes down for a while and then comes back up, it must replay (reindex) any newly indexed documents that arrived while it was down. This can easily be a very large number, requiring a large transaction log and taking a long time to catch up, or it must fallback to a costly full index copy. In contrast, segment based replication only needs to copy the new index files.
- High code complexity: the code to handle the numerous possible cases where replicas can become out of sync quickly becomes complex, and handling a primary switch (because the old primary crashed) especially so.
- No “point in time” consistency: the primary and replicas refresh on their own schedules, so they are all typically searching slightly different and incomparable views of the index.
Finally, in Lucene 6.0, overshadowed by other important features like dimensional points, we quietly improved Lucene’s replication module with support for NRT segment replication, to copy new segment files after a refresh without first having to call commit. This feature is an especially compelling when combined with the neverending trend towards faster and cheaper local area networking technologies.
How does it work?
While the logical design is straightforward (“just copy over the new segment files from primary to replicas”), the implementation is challenging because this adds yet another concurrent operation (replicas slowly copying index files over the wire), along side the many operations that already happen inIndexWriter such as opening new readers, indexing, deleting, segment merging and committing. Fortunately we were able to build on pre-existing Lucene capabilities like NRT readers, to write new segments and identify all their files, and snapshotting, to ensure segment files are not deleted until replicas have finished copying them.
The two main APIs are PrimaryNode, which holds all state for the primary node including a local IndexWriter instance, and ReplicaNode for the replicas. The replicas act like an index writer, since they also create and delete index files, and so they acquire Lucene’s index write lock when they start, to detect inadvertent misuse. When you instantiate each replica, you provide a pointer to where its corresponding primary is running, for example a host or IP address and port.
Both the primary and replica nodes expose a SearcherManager so you can acquire and release the latest searcher at any time. Searching on the primary node also works, and would match the behavior of all Elasticsearch and Solr nodes today (since they always do both indexing and searching), but you might also choose to dedicate the primary node to indexing only.
You use IndexWriter from the primary node to make index changes as usual, and then when you would like to search recently indexed documents, you ask the primary node to refresh. Under the hood, Lucene will open a new NRT reader from its locaIndexWriter, gather the index files it references, and notify all connected replicas. The replicas then compute which index files they are missing and then copy them over from the primary.
Document deletions, which normally carry in memory as a bitset directly from IndexWriter to an NRT IndexReader, are instead written through to the filesystem and copied over as well. All files are first copied to temporary files, and then renamed (atomically) in the end if all copies were successful. Lucene’s existing end-to-end checksums are used to validate no bits were flipped in transit by a flaky network link, or bad RAM or CPU. Finally, the in-memory segments file (a SegmentInfos instance) is serialized on the wire and sent to the replicas, which then deserialize it and open an NRT searcher via the local SearcherManager. The resulting searcher on the replica is guaranteed to search the exact same point-in-time view as the primary.
This all happens concurrently with ongoing searches on the replica, and optionally primary, nodes. Those searches see the old searcher until the replication finishes and the new searcher is opened. You can also use Lucene’s existing SearcherLifetimeManager, which tracks each point-in-time searcher using its long version, if you need to keep older searchers around for a while as well.
The replica and primary nodes both expose independent commit APIs; you can choose to call these based on your durability requirements, and even stagger the commits across nodes to reduce cluster wide search capacity impact.
No transaction log
Note that Lucene does not provide a transaction log! More generally, a cluster of primary + replicas linked by NRT replication behave a lot like a single IndexWriter and NRT reader on a single JVM. This means it is your responsibility to be prepared to replay documents for reindexing since the last commit point, if the whole cluster crashes and starts up again, or if the primary node crashes before replicas were able to copy the new point-in-time refresh.
Note that at the filesystem level, there is no difference between the Lucene index for a primary versus replica node, which makes it simple to shut down the old primary and promote one of the replicas to be a new primary.
Merging
With NRT replication, the primary node also does all segment merging. This is important, because merging is a CPU and IO heavy operation, and interferes with ongoing searching.
Once the primary has finished a merge, and before it installs the merged segment in its index, it uses Lucene’s merged segment warming API to give all replicas a chance to pre-copy the merged segment. This means that a merge should never block a refresh, so Lucene will keep fast refreshes even as large merged segments are still copying. Once all running replicas have pre-copied the merge, then the primary installs the merged segment, and after the next refresh, so do all the replicas.
We have discussed having replicas perform their own merging, but I suspect that will be a poor tradeoff. Local area networks (e.g. 10 gigabit ethernet) are quickly becoming plenty fast and cheap, and asking a replica to also do merging would necessarily impact search performance. It would also be quite complex trying to ensure replicas perform precisely the same merges as the primary at the same time, and would otherwise break the same point-in-time view across replicas.
Abstractions
The primary and replica nodes are abstract: you must implement certain functions yourself. For example, the low level mechanics of how to copy bytes from primary to replica is up to you. Lucene does not provide that, except in its unit tests which use simple point-to-point TCP “thread per connection” servers. You could choose to use rsync, robocopy, netty servers, a central file server, carrier pigeons, UDP multicast (likely helpful if there are many replicas on the same subnet), etc.
Lucene also does not provide any distributed leader election algorithms to pick a new primary when the current primary has crashed, nor heuristics to detect a downed primary or replica. But once you pick the new primary, Lucene will take care of having all replicas cutover to it, removing stale partially copied files from the old primary, etc.
Finally, Lucene does not provide any load-balancing to direct queries to the least loaded replica, nor any cluster state to keep track of which node is the primary and which are the replicas, though
Apache Zookeeper is useful for such shared distributed state. These parts are all up to you!
Expected failure modes
There are many things that can go wrong with a cluster of servers indexing and searching with NRT index replication, and we wrote an evil randomized stress test case to exercise Lucene’s handling in such cases. This test creates a cluster by spawning JVM subprocesses for a primary and multiple replica nodes, and begins indexing and replicating, while randomly applying conditions like an unusually slow network to specific nodes, a network that randomly flips bits, random JVM crashes (SIGSEGV!) of either primary or replica nodes, followed by recovery, etc. This test case uncovered all sorts of fun corner cases!
An especially important case is when the primary node goes down (crashes, loses power or is intentionally killed). In this case, one of the replicas, ideally the replica that was furthest along in copying files from the old primary as decided by a distributed election, is promoted to become the new primary node. All other replicas then switch to the new primary, and in the process must delete any files copied or partially copied from the old primary but not referenced by the new primary. Any documents indexed into the primary but not copied to that replica will need to be indexed again, and this is the caller’s responsibility (no transaction log).
If the whole cluster crashes or loses power, on restart you need to determine whichever index (primary or replica) has the “most recent” commit point, and start the primary node on that host and replica nodes on the other hosts. Those replica nodes may need to delete some index files in order to switch to the new primary, and Lucene takes care of that. Finally, you will have to replay any documents that arrived after the last successful commit.
Other fun cases include: a replica crashing while it was still pre-copying a merge; a replica that is falling behind because it is still copying files from the previous refresh when a new refresh happens; a replica going down and coming back up later after the primary node has also changed.
Downsides
There are also some minor downsides to segment replication:
- Very new code: this feature is quite new and also quite complex, and not widely used yet. Likely there exciting bugs! Patches welcome!
- Slightly slower refresh time: after refreshing on the primary, including writing document deletions to disk as well, we must then copy all new files to the replica and open a new searcher on the replica, adding a bit more time before documents are visible for searching on the replica when compared to a straight NRT reader from an IndexWriter. If this is really a problem, you can use the primary node for searching and have refresh latency very close to what a straight NRT reader provides.
- Index problems might be replicated: if something goes wrong, and the primary somehow writes a broken index file, then that broken file will be replicated to all replicas too. But this is uncommon these days, especially with Lucene’s end to end checksums.
Concluding
NRT segment replication represents an opportunity for sizable performance and reliability improvements to the popular distributed search servers, especially when combined with the ongoing trend towards faster and cheaper local area networks. While this feature unfortunately came too late for Elasticsearch and Solr, I am hopeful that the next popular distributed search server, and its users, can benefit from it!
| Reference: | Lucene’s near-real-time segment index replication from our JCG partner Michael Mc Candless at the Changing Bits blog. |
