ActiveMQ – Network of Brokers Explained – Part 5

Ashwini KuntamukkalaJune 10th, 2014Last Updated: June 10th, 2014

0 58 3 minutes read

In the previous part 4 we have seen how to load balance remote consumers on a queue using network connectors.

In this part 5, we will see how the same configuration would work if we had concurrent remote durable subscribers on a topic. Consider the following configuration….

Fig 1: Network of Brokers – Load balance subscribers on a topic

As shown above, we have Broker-1 which initiates two network connectors to Broker-2 and Broker-3. A producer sends messages to a topic “moo.bar” on Broker-1 while Broker-2 has subscriber C1 and Broker-3 has two subscribers C2 and C3 on the same topic “moo.bar”.

You may observe that this set up is very similar to part 4. The only difference is that here we are dealing with topics while in part 4, we were dealing with queues.

Let’s see this in action

Add the following network connector configuration in Broker-1’s activemq.xml configuration file:

  <networkConnectors>
<networkConnector
name="T:broker1->broker2"
uri="static:(tcp://localhost:61626)"
duplex="false"
decreaseNetworkConsumerPriority="false"
networkTTL="2"
conduitSubscriptions="false"
dynamicOnly="true">
<excludedDestinations>
<queue physicalName=">" />
</excludedDestinations>
</networkConnector>
<networkConnector
name="T:broker1->broker3"
uri="static:(tcp://localhost:61636)"
duplex="false"
decreaseNetworkConsumerPriority="false"
networkTTL="2"
conduitSubscriptions="false"
dynamicOnly="true">
<excludedDestinations>
<queue physicalName=">" />
</excludedDestinations>
</networkConnector>
</networkConnectors>

Let’s start broker-2, broker-3 and broker-1 in that order.

 akuntamukkala@localhost~/apache-activemq-5.8.0/cluster/broker-2/bin$ ./broker-2 console

 akuntamukkala@localhost~/apache-activemq-5.8.0/cluster/broker-3/bin$ ./broker-3 console

 akuntamukkala@localhost~/apache-activemq-5.8.0/cluster/broker-1/bin$ ./broker-1 console

Broker-1’s admin console connections show that two network connectors have been established as configured from Broker-1 to Broker-2 and Broker-3 respectively:

Broker-1’s Connections @ http://localhost:8161/admin/connections.jsp

Let’s start the subscriber C1 on Broker-2 subscribing to messages to topic “moo.bar” and subscribers C2 and C3 on Broker-3 subscribing to messages on same topic “moo.bar”.
Durable Subscribers require unique combination of client id and subscriber name. In order for us to create durable subscribers C2 and C3 we need to enhance the functionality provided in /Users/akuntamukkala/apache-activemq-5.8.0/example/src/ConsumerTool.java where /Users/akuntamukkala/apache-activemq-5.8.0 is the directory where ActiveMQ is installed.
The modified code consists of editing build.xml and ConsumerTool.java to add a new parameter “subscriberName”. The edited files build.xml and ConsumerTool.java can be obtained from here and here respectively.
Let’s start the subscribers now.

 akuntamukkala@localhost~/apache-activemq-5.8.0/example$ ant consumer -Durl=tcp://localhost:61626 -Dtopic=true -Dsubject=moo.bar -DclientId=C1 -Ddurable=true -DsubscriberName=mb.C1

 akuntamukkala@localhost~/apache-activemq-5.8.0/example$ ant consumer -Durl=tcp://localhost:61636 -Dtopic=true -Dsubject=moo.bar -DclientId=C2 -Ddurable=true -DsubscriberName=mb.C2

 akuntamukkala@localhost~/apache-activemq-5.8.0/example$ ant consumer -Durl=tcp://localhost:61636 -Dtopic=true -Dsubject=moo.bar -DclientId=C3 -Ddurable=true -DsubscriberName=mb.C3

Durable subscriber on Broker-2:

http://localhost:9161/admin/subscribers.jsp

Durable subscribers on Broker-3:

http://localhost:10161/admin/subscribers.jsp

Durable subscribers on Broker-1 (because of network connectors):

http://localhost:8161/admin/subscribers.jsp

Now let’s send 10 durable messages to topic moo.bar on Broker-1.

 akuntamukkala@localhost~/apache-activemq-5.8.0/example$ ant producer -Durl=tcp://localhost:61616 -Dtopic=true -Dsubject=moo.bar -Dmax=10 -Ddurable=true

See the console on Broker-3:

Log file output on Broker-3

As you may observe, Broker-3 receives the same message twice, once per each subscription C2 and C3. ActiveMQ by default does not permit processing of duplicate messages.
This happens because both the subscriptions mb.C2 and mb.C3 on Broker-3 are propagated to Broker-1. So when 10 messages are published to moo.bar on Broker-1, those messages are sent over to subscribers mb.C2 and mb.C3 on the same broker: Broker-3. Since the messages have the same ID, duplicate messages are discarded and hence the warning shown in the log messages….(shown in step 19).

Here is the console showing statistics on Broker-1:

http://localhost:8161/admin/subscribers.jsp

Here is the console showing statistics on Broker-3:

http://localhost:10161/admin/subscribers.jsp

As you can see even though the enqueue counter shows 20, the dequeue counter shows only 10, since the other 10 messages were discarded by the Broker-3. This is a useful feature which helps to ensure that a message gets processed at most once by a broker.

The reason why this is occurring is because both subscriptions C2 and C3 are propagated to upstream broker Broker-1.

Duplicate Messages on Broker-3

Let’s retry the same scenario using a minor tweak in the network connector settings by making conduitSubscriptions=”true”
on both network connectors from Broker-1 to Broker-2 and Broker-3 respectively. After restarting the brokers, delete the inactive durable subscribers and then repeat the above steps.

  <networkConnectors>
<networkConnector
name="T:broker1->broker2"
uri="static:(tcp://localhost:61626)"
duplex="false"
decreaseNetworkConsumerPriority="false"
networkTTL="2"
conduitSubscriptions="true"
dynamicOnly="true">
<excludedDestinations>
<queue physicalName=">" />
</excludedDestinations>
</networkConnector>
<networkConnector
name="T:broker1->broker3"
uri="static:(tcp://localhost:61636)"
duplex="false"
decreaseNetworkConsumerPriority="false"
networkTTL="2"
conduitSubscriptions="true"
dynamicOnly="true">
<excludedDestinations>
<queue physicalName=">" />
</excludedDestinations>
</networkConnector>
</networkConnectors>

The following screenshot shows that Broker-1 now sees only two durable subscribers, one from each broker, Broker-2 and Broker-3.